Precautions for Winter Maintenance of Industrial Energy saving Air Conditioner

The winter breeze has quietly arrived, and the temperature in many areas has dropped to over ten degrees. Many factories may no longer need to turn on air conditioning. Kemite energy-saving air conditioning may have completed its mission this year and entered a temporary sleep period.

It is very important to perform appropriate winter maintenance on industrial energy-saving air conditioners to ensure that they can be put back into use in the best condition next summer. Here are some simple and effective maintenance steps:

1. Disconnect the power supply of the device and check whether the circuit is loose and aging;

2. Open the electrical box inside the device and check if the components inside the box are damaged:

3. Drain the water from the external water tank and the pipelines connecting the internal and external units to prevent freezing and cracking of the water pipes. (Note: Install a three-way valve and a switch ball valve at the lowest water level of the water pipe)

4. Clean the filter screen of the internal unit thoroughly;

5. Clean the evaporator of the internal unit: (Note: When cleaning the evaporator, remove the fan blades and wrap the motor to prevent water from entering during cleaning)

6. After cleaning the surface of the internal unit, wrap it with wrapping film or customized dust cover to prevent dust:

7. Clean the bottom of the external water tank:

8. Take off the water curtain of the external unit and rinse it clean;

9. Close the inlet valve and the drain valve, and open the inlet valve and drain valve again next year when using them;

10. After cleaning the surface of the external unit, wrap it with wrapping film or a customized dust cover to prevent dust;

Equipment maintenance can extend the service life of equipment, improve the cooling effect of equipment, and reduce the failure rate of equipment!