Diagnosis and treatment of simple faults in industrial energy-saving air conditioners!

The diagnosis and handling of simple faults in industrial energy-saving air conditioners can be represented and summarized according to the following points:

1、 Power failure

Judgment:

Check if the air conditioner is powered on and if the power indicator light is on.

Use a voltmeter to check if the power supply voltage is stable and within the normal range required by the air conditioner.

handle:

If the power is not connected, please ensure that the power plug is plugged into the socket and check if the power switch is turned on.

If the power supply voltage is unstable or exceeds the normal range, please contact a professional electrician for repair.

2、 Cooling effect decreases

Judgment:

Observe whether the cooling effect of the air conditioner has significantly decreased and whether the indoor temperature cannot be lowered to the set value.

Check whether the air conditioning inlet and outlet are blocked, and whether the air circulation is smooth.

handle:

Clean the air filter to ensure smooth air circulation.

Check whether there is accumulated dust or dirt on the condenser and evaporator, and clean them with compressed air or a soft brush.

If the refrigerant leaks or is insufficient, please contact professional technicians for inspection and supplementation.

3、 Excessive noise

Judgment:

Listen for any abnormal noise when the air conditioner is running, such as creaking or buzzing.

Check if the air conditioning installation is stable and if there is any looseness or vibration.

handle:

If the noise comes from the fan, it may be due to damaged fan blades or worn bearings. Please contact a professional for replacement.

Check if the air conditioning installation is stable. If there is any looseness or vibration, please reinforce and adjust it.

4、 Water leakage issue

Judgment:

Observe whether there are water droplets or water accumulation under the indoor unit of the air conditioner.

Check if the drainage pipe is blocked or bent, causing poor drainage.

handle:

Clean the dirt and blockages in the drainage pipe to ensure smooth drainage.

If the drainage pipe is bent or damaged, please repair or replace it.

5、 Electrical malfunction

Judgment:

Observe whether there are any abnormal displays or button malfunctions on the air conditioning control panel.

Check if there is any damage or short circuit in the power and control wires of the air conditioner.

handle:

If the control panel displays abnormally or the buttons malfunction, please contact a professional for maintenance or replacement.

Check whether the power and control wires are damaged or short circuited. If so, please repair or replace them.

preventive measure

Regularly maintain and clean industrial air conditioners, including cleaning air filters, condensers, and evaporators.

Ensure that the air conditioner is installed securely and avoid looseness or vibration.

Regularly inspect the drainage pipes to ensure smooth drainage.

Regularly inspect electrical circuits and connecting components to ensure safety and reliability.

Through the above methods, common faults of industrial energy-saving air conditioners can be easily identified and handled, and corresponding preventive measures can be taken to avoid the occurrence of faults. If you encounter complex problems or situations that cannot be handled, please contact professional personnel in a timely manner for maintenance and repair.